role-selection
Welcome!
We'd like to make your visit as useful as possible. Please tell us your role so we can offer you the most relevant information on future visits. (This is the only time we'll ask you!)
Select a Role:
role-selection-error ERROR
* Please select a role and press SUBMIT
Thanks!
Please help us expand this feature by telling us your role.
(optional)
No Thanks      

Glossary: Terms and Definitions Used on this Site

Not sure what that means? Get definitions here.

Technical Information
CAD/REVIT Download Center
SketchUp Download Center
Build a Specification
Build a Submittal
Data Pages
Product Literature
MSDS
Installation
Maintenance
Warranties Seismic Solutions FAQs
Glossary
Continuing Education
Chat Live
Quick Links:
Acoustical Performance Terms
Application Standards
Fire Performance Terms
General Terms
Light Reflectance Terms
Suspension System Terms
 

Light Reflectance Terms

Illuminance Levels
Illuminance is the quantity of light falling onto a surface. It is measured in footcandles or lux (metric measure). One footcandle is approximately 10 lux.

Luminance – Luminance is the quantity of light reflecting (or emitting) from a surface in the direction of the viewer. It is measured in foot-lamberts or candela/m2 (metric measure). Luminance is a measure of brightness.

Brightness Ratio – Brightness ratio is a measure of the quality of a lighting installation. It is an important measure of indirect lighting. A good indirect lighting system has a ceiling brightness ratio of less than 10 to 1.

Light Loss Factor (LLF) Used to calculate illuminance loss after a given period of time and under given conditions, such as, expected lamp light depreciation, expected lamp burn out, room surface dirt accumulation and ballast performance factors.

Light Reflectance (LR)
Light reflectance is a fundamental property of a material. It is a measure of a material’s ability to reflect visible light. The measure of light reflectance is that fraction of the specified incident light striking a surface that is reflected by the surface. (Defined in ASTM E 1477).

Nonspecular Surface Describes a surface which is diffuse, meaning it reflects light in equal amounts in all directions. This is important because a nonspecular ceiling’s brightness will be the same regardless of viewing position. Typically, nonspecular (diffuse) surfaces are less glossy and produce less offensive glare. 

 

 

PLEASE NOTE

Please provide a properly formatted email address. (example: email@company.com)
My Armstrong | View Cart
Change Country | Français Canada
Search
COMMERCIAL CEILINGS & WALLS | USA & Canada