|
Suspension Systems
General Application:Prelude 15/16"
Suprafine 9/16"
Interlude 9/16"
Silhouette 9/16"
Special Application:HRC Grid
Clean Room
Acoustical Locking Angle
Design Options:Axiom
Serpentina
Seismic ComplianceView all . . .
|
 |
  |
Save Money |
|
Compared to traditional installation methods, our Drywall System is faster and will save you money, here's why:
-
Eliminate the labor-intensive cutting, tying and spacing of track and channel framing
-
Armstrong Drywall Systems are engineered with rout locations and cross tees to maintain precise module spacing
|
Traditional Track & Channel |
Armstrong Drywall System |
Eliminate Time-consuming Adjustments for Type “F” Fixtures
Armstrong Drywall Systems have 51 main beam rout locations and seven cross tees engineered to accommodate type “F” without
field modification or accessories. 50", 26" and 14" cross tees are available.
For additional type “F” fixture options, install main beams 50" on center using our 50" cross tee and you’ll have unlimited
options for fixture placement parallel or perpendicular to the main beams.
Performance You Can Count On
- Stronger grid for improved handling during installation with the PeakForm™ profile
- More secure connections with the SuperLock™ clip
- Prevent screw spin-off with ScrewStop™ reverse hem
- Easier screw insertion with deeper knurling and wide 1-1/2" face
- Greater torsional strength and stability with rotary-stitching
- Superior corrosion resistance in exterior applications with G90 hot dipped galvanized coating
- Heavy-duty load rating
- 26 UL Fire Resistant designs
|
|
|
| |
|
 New Stucco Main, Faster, More Accurate Solution for Framing Stucco Ceilings
|
- 13.5" o.c. route hole spacing complies with ASTM C1063 table 4
- Tee shape with pre-drilled holes in main beam face allows plaster to key around edge and through pre-drilled holes unlike
traditional framing systems
- Additional route locations accommodate odd size fixtures and eliminate additional measuring, marking and tying
- Wind uplift code compliant (see our wind chart in Stucco/Plaster Technical Brochure
CS-3541)
Pre-Rock Locking Angle Molding - Now Fire Rated!
Pre-Rock LAM is the faster, more accurate solution for two phase gypsum board application. G40 or G90, .018" metal thickness
meets ASTM C645. Pre-engineered locking tabs punched 8" on center eliminates:
- measuring 16" or 24"
- lateral and upward movement
- screws, pop rivets or crimps needed to attach tees to molding
Easily Create Any Curve
- Simplify your curved drywall installations with a new pre-notched main beam and create the radius you need
- Quickly customize main beams to suit any curved radius
- Flexibility for you to control the curve so you’re not limited to a manufactured radius
- Easily create all your curved grid on the ground or at the shop and make installation faster on the scaffolding
|
|
|
|
|
