|
|
Drywall Grid System
|
Product Type
- You Have Selected:Drywall Grid SystemsChange Product Type
- Ceilings
- Walls
- Suspension Systems
- Trims and Transitions
- Building Perimeter Systems
Line
- You Have Selected:Drywall Grid SystemChange Line
- Drywall Grid Accessories
- Drywall ShortSpan
- Quikstix Ceilings Locking Pocket Mains
- Quikstix Soffits
- Quikstix Walls
Space / Use Area
- You Have Selected:CorridorsChange Space / Use Area
- Airports / Bus / Train Stations
- Atrium, Lobby / Reception Areas
- Exterior Soffits
- Theatres
System Type
- Drywall/Stucco/Plaster
- Exposed Tee
|
| Drywall Grid System Save time and reduce material and labor costs compared to traditional installation methods. Our Drywall Grid Systems are engineered to get you on and off the job faster, easier, better. Armstrong Drywall
Grid System | Traditional Framing System |  | | | Engineered to maintain precise module spacing through manufactured rout locations, this grid system saves time, labor and money. | Track and channel construction requires labor-intensive cutting, tying and spacing. | Reduce the Risk
Our systems are tested and engineered to be code compliant:* - Meet ASTM C635 and C645
- Installation per ASTM C636 and C754
- ICC-ES Report ESR-1289
- Department of State Architect – DSA PA105
- City of LA – RR 25348
*Consult local codes for specific requirements | | | | | | 6' DGS Cross Tees Speed Installations and Reduce Material Costs | | 
| - 6' spacing on mains results in cost savings of 10-15% by reducing material, hanger wire and installation time
- Supports up to 2 layers of gypsum board (see 6' Tee DGS Technical Guide for load and wire spacing info.
- Extra rout holes to accommodate F-Type Light Fixtures
- G40, .018" metal thickness meets ASTM C645
- UL Fire Rated
| | Easily Create Any Curve | | 
| - Simplify your curved drywall installations with our pre-notched main beams (HD8906F08 and HD8906F16) to create the radius you need
- RC2 Clip allows you to quickly customize our pre-notched main beams to suit any curved radius
- Design flexibility gives you control so you’re not limited to a manufactured radius
- Easily create all your curved grid on the ground or at the shop and make installation faster on the scaffolding
| | New Control and Expansion Joints | | 
Control Joint
Expansion Joint | - Armstrong is the only manufacturer to offer aluminum, 100% zinc and galvanized control and expansion joints
- Single source of supply for all required framing members
- Meet ASTM requirements (Aluminum: E331; Vinyl: D256, D638, D696, D790, D1784, D4216, D648160, C1063; Zinc & Galvanized: C645, C955)
- Work with any of our Stucco, Plaster, EIFS and Drywall Systems
|
13 Products
Compare up to 4 Products:
Compare
|
|
