ACOUSTICAL CEILINGS & WALLS | Lesotho

Glossary

Our glossary shows a comprehensive list of common terms used in the suspended ceilings field. The terms are grouped with topics of a similar nature for easier navigation. If you can't find your question listed then contact our technical experts.

Acoustics

Fire

Other definitions

Sound systems

Systems / Edge details / Installation

Alpha w - aw (weighted sound absorption coefficient) - A single-number rating for random incidence sound absorption coefficients determined in accordance with EN ISO 11654. With this method measured values obtained in accordance with EN ISO 20354 are converted into octave bands at 250, 500, 1000, 2000 and 4000 Hz and are plotted on a graph. A standard reference curve is then shifted towards the measured values until a "best fit" is obtained. The derived value of alpha w will vary between 0.00 and 1.00 but is only expressed in multiples of 0.05 eg alpha w = 0.65.

Dncw (weighted suspended ceiling normalised level difference (Dncw) - A single-number rating of the laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it. The rating is determined in accordance with EN ISO 717-1 from measurements made in accordance with EN 20140-9 over the third-octave band frequency range 100-3150 Hz.

Frequency - The number of times per second in Hertz ( Hz) at which sound pressure waves are generated by a source.

Hertz (Hz) - The unit of frequency measurement. One cycle per second is one Hertz.

NRC (Noise Reduction Coefficient) - A single-number descriptor for random incidence sound absorption coefficients. Defined in ASTM 423 90a, as the arithmetical average, to the nearest multiple of 0.05, of the measured sound absorption coefficients at the four one-third octave band centre frequencies of 250, 500, 1000 and 2000 Hz.

Reverberation - The persistence of sound in an enclosure, due to its continued reflection from the surfaces (walls, ceiling, floor, etc...), after the sound source has ceased. Reverberation is of significance in determining the quality and level of sound in an enclosure.

Reverberation Time - The time, in seconds, required for reverberant sound in an enclosure to decay to one-millionth (60 dB) of its original intensity after the cessation of the sound source. Reverberation time is frequency dependent and is normally measured in one-third octave or octave bands.

Rw (weighted sound reduction index) - A single number rating of laboratory measurement of airborne sound reduction index. The rating is determined in accordance with EN ISO 717-1 from measurements made in accordance with EN 20140-3 over the third-octave band frequency range 100-3150 Hz.

Sound Absorption - The conversion of sound energy into heat (by friction) when passing through or striking a material or when causing a volume of air to resonate.

Sound Attenuation - A term used in relation to the room-to-room transmission of sound via a common ceiling plenum.

Sound Insulation - A general term describing the reduction of airborne and structure borne sound between separate spaces.


Search
Welcome!
We'd like to make your visit as useful as possible. Please tell us your role so we can offer you the most relevant information on future visits. (This is the only time we'll ask you!)
Please select a role below:
No Thanks      
Thanks!
Please help us expand this feature by telling us your role.
(optional)
No Thanks