You are here: Commercial Flooring > Technical Data > Product Spec Sheet

Email Print

TECHNICAL DATA

Product Spec Sheet - Static Dissipative SDT

Form(s):
Tile
12 in (305 mm) Wide x 12 in (305 mm) Length

Reference Specs:
ASTM F 1066 Class 2 - through-pattern
Meets requirements for size, thickness, squareness, indentation, impact, dimensional stability, resistance to chemicals, and resistance to heat.

Fire Test Data :
ASTM E 648 Critical Radiant Flux Class I - 0.45 or more watts/cm2

ASTM E 662 Smoke Developed 450 or less
Numerical flammability ratings alone may not define the performance of the product under actual fire conditions. These ratings are provided only for use in the selection of products to meet the specified limits.

Static Load Limit:
ASTM F 970 75 psi (5.27 kg/cm2)


Gauges:
1/8 in (3.2 mm) overall (nominal)

Durability :
1/8 in (3.2 mm) - Very Good

Maintainability :
1/8 in (3.2 mm) - Good

Resilience :
1/8 in (3.2 mm) - Good

Electrical Resistence :
ESD-S7.1 and ASTM F-150 10e6 to 10e9 ohms
Point to point, and point to ground, when installed as a system.

Static Generation :
ESD STM 97.2 at 40% R.H.:<10 volts; at 12% R.H.:<100 volts
when installed as a system, flooring in combination with ESD footwear and a person.

Static Decay :
Fed Test 101c, Method 4046 (5000 volts to zero) in < 0.5 sec.
when installed as a system, flooring in combination with ESD footwear and a person.


Approximate Installed Cost (per Sq. Ft.):

Tile
1/8 in(3.2 mm): U.S.: $5.75 to $6.25
Get new product alerts:

Armstrong.com Home | Commercial Floors | Commercial Ceilings | Careers

Site Map | About Armstrong | Global Locations | Contact Armstrong | Terms & Conditions | Privacy Policy

Hardwood Flooring | Laminate Flooring