8 Products

Product Lines

Learn more about the product lines that match your selection criteria.
Feather Edge Skirting
Flexible vinyl skirting with a coved base (toe) and tapered top edge for use as a finish with smooth flooring.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 15 metre coils.
Flexible vinyl skirting with a coved base (toe) and tapered top edge for use as a finish with smooth flooring.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 15 metre coils.
Less ▲
Flat Skirting
Flat, flexible vinyl skirting with tapered edges for use with carpet installations or as kick plates on doors.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 30 metre coils.
Flat, flexible vinyl skirting with tapered edges for use with carpet installations or as kick plates on doors.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 30 metre coils.
Less ▲
Wall Capping Strip
A finishing strip to cover the exposed edge of vinyl on vertical surfaces, either vinyl wall sheeting or coved flooring.
  • Available in 25mm width x 3mm thick x 15 metre coils.
A finishing strip to cover the exposed edge of vinyl on vertical surfaces, either vinyl wall sheeting or coved flooring.
  • Available in 25mm width x 3mm thick x 15 metre coils.
Less ▲
Tile Trim
A reducing strip that provides a flush finish at floor covering edges tapering down for a neat finish with floor.
  • Available in 2mm, 3mm or 5mm thickness x 25mm width x 15 metre coils.
A reducing strip that provides a flush finish at floor covering edges tapering down for a neat finish with floor.
  • Available in 2mm, 3mm or 5mm thickness x 25mm width x 15 metre coils.
Less ▲
Cove Fillet
Provides a properly shaped coved section to act as a supporting base for coved sheet vinyl flooring.
  • Available in 2 sizes, 32mm x 32mm and 20mm x 20mm.
  • Available in 15 metre coils.
Provides a properly shaped coved section to act as a supporting base for coved sheet vinyl flooring.
  • Available in 2 sizes, 32mm x 32mm and 20mm x 20mm.
  • Available in 15 metre coils.
Less ▲
Wedge Fillet
A diminishing strip used to equalise the thickness difference between coved floor vinyl and Wallflex wall vinyl. Forms the basis of the Armstrong hygienic vinyl system allowing a fully heat welded installation.
  • Available tapered from 0.75mm to 0.1mm x 45mm wide in 25 metre coils.
A diminishing strip used to equalise the thickness difference between coved floor vinyl and Wallflex wall vinyl. Forms the basis of the Armstrong hygienic vinyl system allowing a fully heat welded installation.
  • Available tapered from 0.75mm to 0.1mm x 45mm wide in 25 metre coils.
Less ▲


Please note: Colours illustrated are matched as closely as possible. Variation from sample may appear.