Flooring Accessories

For all Armstrong flooring products, we offer the right accessories. We are pleased to present edge trims, stair nosings, one safety stair nosing and different kinds of base boards matching to our flooring products.



53 Products

1  2  3   


Product Lines

Learn more about the product lines that match your selection criteria.
Feather Edge Skirting
Flexible vinyl skirting with a coved base (toe) and tapered top edge for use as a finish with smooth flooring.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 15 metre coils.
Flexible vinyl skirting with a coved base (toe) and tapered top edge for use as a finish with smooth flooring.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 15 metre coils.
Less ▲
Flat Skirting
Flat, flexible vinyl skirting with tapered edges for use with carpet installations or as kick plates on doors.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 30 metre coils.
Flat, flexible vinyl skirting with tapered edges for use with carpet installations or as kick plates on doors.
  • Available in 100mm and 150mm height and 1.5mm thick in both Standard and CX formulations.
  • All sizes in 30 metre coils.
Less ▲
Wall Capping Strip
A finishing strip to cover the exposed edge of vinyl on vertical surfaces, either vinyl wall sheeting or coved flooring.
  • Available in 25mm width x 3mm thick x 15 metre coils.
A finishing strip to cover the exposed edge of vinyl on vertical surfaces, either vinyl wall sheeting or coved flooring.
  • Available in 25mm width x 3mm thick x 15 metre coils.
Less ▲
Tile Trim
A reducing strip that provides a flush finish at floor covering edges tapering down for a neat finish with floor.
  • Available in 2mm, 3mm or 5mm thickness x 25mm width x 15 metre coils.
A reducing strip that provides a flush finish at floor covering edges tapering down for a neat finish with floor.
  • Available in 2mm, 3mm or 5mm thickness x 25mm width x 15 metre coils.
Less ▲
Cove Fillet
Provides a properly shaped coved section to act as a supporting base for coved sheet vinyl flooring.
  • Available in 2 sizes, 32mm x 32mm and 20mm x 20mm.
  • Available in 15 metre coils.
Provides a properly shaped coved section to act as a supporting base for coved sheet vinyl flooring.
  • Available in 2 sizes, 32mm x 32mm and 20mm x 20mm.
  • Available in 15 metre coils.
Less ▲
Stair Nosing
This profile is designed to fit snugly to the nose of stairs to give a slip retardant finish. Mainly used in conjunction with vinyl flooring on treads and risers.
  • Available in 2.5 metre lengths x 4mm thick.
  • Tread is 64mm wide, nosing is 28mm deep.
This profile is designed to fit snugly to the nose of stairs to give a slip retardant finish. Mainly used in conjunction with vinyl flooring on treads and risers.
  • Available in 2.5 metre lengths x 4mm thick.
  • Tread is 64mm wide, nosing is 28mm deep.
Less ▲
Wedge Fillet
A diminishing strip used to equalise the thickness difference between coved floor vinyl and Wallflex wall vinyl. Forms the basis of the Armstrong hygienic vinyl system allowing a fully heat welded installation.
  • Available tapered from 0.75mm to 0.1mm x 45mm wide in 25 metre coils.
A diminishing strip used to equalise the thickness difference between coved floor vinyl and Wallflex wall vinyl. Forms the basis of the Armstrong hygienic vinyl system allowing a fully heat welded installation.
  • Available tapered from 0.75mm to 0.1mm x 45mm wide in 25 metre coils.
Less ▲

1  2  3   



Please note: Colours illustrated are matched as closely as possible. Variation from sample may appear.